Products HomeØ1" Lens Tubes
- Lens Tubes Accept Ø1" (25.4 mm) Optics
- SM1 Thread Standard Used Throughout Thorlabs' Product Line
- Designed for Use with Our 30 mm Cage Systems
SM1M10
Internal Threads
SM1S20
External Threads
SM1L05V
Internal and External Threads
SM1L40
Internal and External Threads
SM1L10E
Internal Threads, Optic Retention Lip
SM1L30C
Slotted Lens Tube
(Optic Not Included)
Easily Interfaces with Other Lens
Tube Sizes
SM05
SM1
SM2
SM3
Please Wait
| Ø1" Shortcuts |
|---|
| Lens Tube Couplers SM Thread Adapters Lens Tube Mounts End Caps Kinematic Mounts Fixed Lens Mounts Rotational Mounts Translation Mounts |
Features
- Variety of Lens Tubes in Lengths from 0.30" (7.6 mm) to 4.00" (101.6 mm)
- Standard Lens Tubes
- Lens Tubes without External Threading
- Lens Tubes with Optic Retention and No External Threading
- Lens Tube Spacers without Internal Threading
- Slotted Lens Tubes for Access to Optics without Disassembly
- Extension Tube for Optics with Long Focal Lengths
- Wide Range of SM1 (1.035"-40) Compatible Optomechanical Components
- Compatible with Our 30 mm Cage Systems
- Vacuum-Compatible Options Available
- Lens Tubes Directly Accept Ø1" (Ø25.4 mm) Optics
Lens tubes are ideal for creating compact optical subassemblies with light-tight beam paths. The Ø1" lens tubes sold here can be used to house one or several optical elements, as shown in the diagram of a beam expander below. In addition to the Ø1" lens tubes featured on this page, Thorlabs also offers Ø1/2", Ø30 mm, Ø1.5", Ø2", and Ø3" versions, each of which is equipped with an SM series thread standard that depends on the tube diameter. Vacuum-compatible versions of our Ø1/2" and Ø1" stackable lens tubes are available from stock; customers can request vacuum-compatible lens tubes at other lengths and diameters by contacting Tech Support.
Optics are separated and secured by retaining rings at the desired depth within the lens tube using a compatible SM1 spanner wrench, sold below. Each of the lens tubes on this page come with one or two compatible SM-threaded retaining rings with the exception of the internally unthreaded lens tube spacers (Item #'s beginning with SM1S). In addition, Thorlabs offers stress-free and plastic retaining rings for optics which require reduced stress on our Retaining Rings page.
Click to Enlarge
When an engraved lens tube is attached to another lens tube, the engraving of the connected end is no longer visible.
| SM05 Threading: Ø1/2" Lens Tubes, 16 mm Cage Systems | |||
|---|---|---|---|
| External Thread, 0.535"-40.0 UNS-2A | Internal Thread, 0.535"-40.0 UNS-2B | ||
| Max Major Diameter | 0.5340" | Min Major Diameter | 0.5350" |
| Min Major Diameter | 0.5289" | Min Pitch Diameter | 0.5188" |
| Max Pitch Diameter | 0.5178" | Max Pitch Diameter | 0.5230" |
| Min Pitch Diameter | 0.5146" | Min Minor Diameter (and 83.3% of Thread) | 0.508" |
| Max Minor Diameter | 0.5069" | Max Minor Diameter (and 64.9% of Thread) | 0.514" |
| RMS Threading: Objective, Scan, and Tube Lenses | |||
|---|---|---|---|
| External Thread, 0.800"-36.0 UNS-2A | Internal Thread, 0.800"-36.0 UNS-2B | ||
| Max Major Diameter | 0.7989" | Min Major Diameter | 0.8000" |
| Min Major Diameter | 0.7934" | Min Pitch Diameter | 0.7820" |
| Max Pitch Diameter | 0.7809" | Max Pitch Diameter | 0.7866" |
| Min Pitch Diameter | 0.7774" | Min Minor Diameter (and 83.3% of Thread) | 0.770" |
| Max Minor Diameter | 0.7688" | Max Minor Diameter (and 64.9% of Thread) | 0.777" |
| C-Mount Threading: Machine Vision Lenses, CCD/CMOS Cameras | |||
|---|---|---|---|
| External Thread, 1.000"-32.0 UN-2A | Internal Thread, 1.000"-32.0 UN-2B | ||
| Max Major Diameter | 0.9989" | Min Major Diameter | 1.0000" |
| Min Major Diameter | 0.9929" | Min Pitch Diameter | 0.9797" |
| Max Pitch Diameter | 0.9786" | Max Pitch Diameter | 0.9846" |
| Min Pitch Diameter | 0.9748" | Min Minor Diameter (and 83.3% of Thread) | 0.966" |
| Max Minor Diameter | 0.9651" | Max Minor Diameter (and 64.9% of Thread) | 0.974" |
| SM1 Threading: Ø1" Lens Tubes, 30 mm Cage Systems | |||
|---|---|---|---|
| External Thread, 1.035"-40.0 UNS-2A | Internal Thread, 1.035"-40.0 UNS-2B | ||
| Max Major Diameter | 1.0339" | Min Major Diameter | 1.0350" |
| Min Major Diameter | 1.0288" | Min Pitch Diameter | 1.0188" |
| Max Pitch Diameter | 1.0177" | Max Pitch Diameter | 1.0234" |
| Min Pitch Diameter | 1.0142" | Min Minor Diameter (and 83.3% of Thread) | 1.008" |
| Max Minor Diameter | 1.0068" | Max Minor Diameter (and 64.9% of Thread) | 1.014" |
| SM30 Threading: Ø30 mm Lens Tubes | |||
|---|---|---|---|
| External Thread, M30.5 x 0.5 – 6H/6g | Internal Thread, M30.5 x 0.5 – 6H/6g | ||
| Max Major Diameter | 30.480 mm | Min Major Diameter | 30.500 mm |
| Min Major Diameter | 30.371 mm | Min Pitch Diameter | 30.175 mm |
| Max Pitch Diameter | 30.155 mm | Max Pitch Diameter | 30.302 mm |
| Min Pitch Diameter | 30.059 mm | Min Minor Diameter (and 83.3% of Thread) | 29.959 mm |
| Max Minor Diameter | 29.938 mm | Max Minor Diameter (and 64.9% of Thread) | 30.094 mm |
| SM1.5 Threading: Ø1.5" Lens Tubes | |||
|---|---|---|---|
| External Thread, 1.535"-40 UNS-2A | Internal Thread, 1.535"-40 UNS-2B | ||
| Max Major Diameter | 1.5339" | Min Major Diameter | 1.535" |
| Min Major Diameter | 1.5288" | Min Pitch Diameter | 1.5188" |
| Max Pitch Diameter | 1.5177" | Max Pitch Diameter | 1.5236" |
| Min Pitch Diameter | 1.5140" | Min Minor Diameter (and 83.3% of Thread) | 1.508" |
| Max Minor Diameter | 1.5068" | Max Minor Diameter (and 64.9% of Thread) | 1.514" |
| SM2 Threading: Ø2" Lens Tubes, 60 mm Cage Systems | |||
|---|---|---|---|
| External Thread, 2.035"-40.0 UNS-2A | Internal Thread, 2.035"-40.0 UNS-2B | ||
| Max Major Diameter | 2.0338" | Min Major Diameter | 2.0350" |
| Min Major Diameter | 2.0287" | Min Pitch Diameter | 2.0188" |
| Max Pitch Diameter | 2.0176" | Max Pitch Diameter | 2.0239" |
| Min Pitch Diameter | 2.0137" | Min Minor Diameter (and 83.3% of Thread) | 2.008" |
| Max Minor Diameter | 2.0067" | Max Minor Diameter (and 64.9% of Thread) | 2.014" |
| SM3 Threading: Ø3" Lens Tubes | |||
|---|---|---|---|
| External Thread, 3.035"-40.0 UNS-2A | Internal Thread, 3.035"-40.0 UNS-2B | ||
| Max Major Diameter | 3.0337" | Min Major Diameter | 3.0350" |
| Min Major Diameter | 3.0286" | Min Pitch Diameter | 3.0188" |
| Max Pitch Diameter | 3.0175" | Max Pitch Diameter | 3.0242" |
| Min Pitch Diameter | 3.0133" | Min Minor Diameter (and 83.3% of Thread) | 3.008" |
| Max Minor Diameter | 3.0066" | Max Minor Diameter (and 64.9% of Thread) | 3.014" |
| SM4 Threading: Ø4" Lens Tubes | |||
|---|---|---|---|
| External Thread, 4.035"-40 UNS-2A | Internal Thread, 4.035"-40.0 UNS-2B | ||
| Max Major Diameter | 4.0337" | Min Major Diameter | 4.0350" |
| Min Major Diameter | 4.0286" | Min Pitch Diameter | 4.0188" |
| Max Pitch Diameter | 4.0175" | Max Pitch Diameter | 4.0245" |
| Min Pitch Diameter | 4.0131" | Min Minor Diameter (and 83.3% of Thread) | 4.008" |
| Max Minor Diameter | 4.0066" | Max Minor Diameter (and 64.9% of Thread) | 4.014" |
| Posted Comments: | |
Ian Astley
(posted 2023-12-21 11:14:24.647) Is it possible to create a SM1L15V? Don't need it for vacuum applications but the non-anodized aluminum is easier to ground in our system and we need 1.5 inches in our lens tube.
We've currently been removing the anodized coating from SM1L15 with oven cleaner(NaOH). Would be much easier if we could purchase directly. ksosnowski
(posted 2023-12-21 03:56:55.0) Thank you for reaching out to us Ian. The vacuum lens tube models are chemically cleaned and double vacuum-bagged to meet the ratings however we can generally offer lens tubes without the anodization applied as a special item. For custom requests like this you can contact techsupport@thorlabs.com and I have reached out directly to discuss your application further. Steven Leigh
(posted 2023-09-29 10:41:20.93) Great product. Could Thorlabs please consider adding two customer-inspired parts -- one is SM1L15C (1.5" thread depth) and the second is SM1L25C (2.5" thread depth)? Thanks! jdelia
(posted 2023-10-02 02:36:46.0) Thank you for contacting Thorlabs, and for providing this valuable feedback. I have logged your request in our internal suggestion forum for consideration as a future product line. Sam Chen
(posted 2023-09-21 19:25:55.067) what's the spec of following items? what's the standards that you follow?
1. SM1 (Ø1.035-40) SERIES EXTERNAL THREAD
2. SM1 (Ø1.035-40) SERIES INTERNAL THREAD cdolbashian
(posted 2023-09-25 11:08:16.0) Thank you for reaching out to us with these inquiries. The standards as well as the threading information can be found above within the "threading specs" tab. user
(posted 2023-04-13 13:50:37.47) mech drawing has manual callout for internal thread that is obviously SM05.
it's not hard to set up solidworks with preformatted thread forms for all the Thor SM threads; i did it while i was there. it's worth the time, you should try to push mech to do it, it'll prevent errors like this and overall save everyone time and improve accuracy. jdelia
(posted 2023-04-17 10:18:55.0) Thank you for contacting Thorlabs. Unfortunately this is not something we provide. The SolidWorks models we provide for our components have cosmetic threads, as real threads consume a large amount of memory within SolidWorks, and are generally not recommended for larger assemblies, as it will slow your computer down drastically. The threading information for our parts can generally be found in the CAD drawings which we offer for download on the website. Andrey Kuznetsov
(posted 2021-03-22 19:14:15.633) Could you please make a SM1L03E part as standard offering? YLohia
(posted 2021-03-23 10:25:02.0) The SM1L03E is currently a standard/stock offering. Archie Toribio
(posted 2020-04-01 14:38:06.54) May I have a RoHS-3 and REACH SVHC-205 CoC for the mfr p/n SM1L03 please?
Thanks.
Archie Toribio
Compliance Analyst
Thermofisher Inc. YLohia
(posted 2020-04-01 03:24:10.0) Hi Archie, thank you for contacting Thorlabs. We will reach out to you directly. Colin Stephen
(posted 2020-02-13 04:21:49.513) Product idea that would be handy. A locking screw on the cover such that once adjusted access requires use of a tool (e.g. Allen key) so that it can be used as part of enclosing a class IIIb or class 4 laser system as class 1. llamb
(posted 2020-02-13 03:45:24.0) Thank you for your feedback regarding our SM1L20C slotted lens tube. I will add this to our internal product forum for further discussion. Timothy Murray
(posted 2019-10-23 06:06:32.77) Unable to obtain ROHS sheet for this item YLohia
(posted 2019-10-23 08:40:55.0) Thank you for contacting Thorlabs. We will reach out to you directly with this information. ludoangot
(posted 2019-01-03 19:50:53.187) Would it be possible you offer your SM1Lxx and SM1Mxx tubes without the retaining ring? The ring is mainly useful when an optical element is to be inserted in the tube, but in several optical assemblies the ring isn't used: after several years of using these tubes for various optical assemblies, we have accumulated more than a dozen of these rings for which we have no use. At USD4.50 the ring, it would be a welcome cost reduction to be able to order the tubes without the ring. YLohia
(posted 2019-01-09 09:26:42.0) Hello, thank you for your feedback. We do have the ability to sell these lens tube separately, however, these will be offered as "special" items through Tech Support (and have to go through a special quoting process that can incur a 1-2 day lead time). Due to the additional processing involved, the price of the tube without the retaining ring is nearly the same as that of the standard bundle with the retaining ring included. Given that you're not using retaining rings with your lens tubes, it's possible that one of our Ø1" Lens Tube Spacers Without Internal Threads may be suitable (they come without retaining rings). I will reach out to you directly with more information. user
(posted 2017-02-09 12:22:23.463) I would like to suggest creation of a new product for 0.5" thick optics without so much excess as using the 1 inch long tube: SM1L075 for a tube with thread depths of either 0.75". Thanks! tfrisch
(posted 2017-02-16 11:56:59.0) Hello, thank you for contacting Thorlabs. We can likely offer this as a custom if you reach out to us at TechSupport@Thorlabs.com. I will also post it in our internal engineering forum. lukasz.dziechciarczyk
(posted 2016-07-25 06:50:31.153) Dear Sir or Madame,
Is there a lens tube like SM1L05 but with a locking screw going through it that could hold a custom piece inside (unthreaded) ?
Lukasz aklossek
(posted 2015-10-29 09:30:05.75) Dear ladies and gentlemen,
I'm interested in using the SM1S10 lens tube. Do I understand auto CAD pdf correctly by seeing that the thread is not complete along to the thread range? This may cause that components with thin thread (e.g. CM1-DCH) rotate freely.
Best regards
André Klossek besembeson
(posted 2015-10-29 02:55:33.0) Response from Bweh at Thorlabs USA: Yes the thread is not complete but it will not cause free rotation. The un-threaded space on the SM1S10 is 0.38mm while the threaded region of the CM1-DCH is about 2.03mm so you should still have at least 2 threads that will lock the two together. ludoangot
(posted 2015-08-03 14:01:00.307) Hello, 1.5" long tubes would be much welcomed, I have a 1" thick lens element which doesn't fit in your 1" tubes but 2" is too long for my setup! Could you offer these in both SM1Lxx and SM1Mxx line? besembeson
(posted 2015-08-19 11:54:55.0) Response from Bweh at Thorlabs USA: Thanks for your feedback. We can offer this to you as a special item for now. I will follow up by email. We will review this as a possible expansion to the lens tube stock product line. cbrideau
(posted 2015-07-29 11:45:51.027) I'd like to see an extension tube like this made available for the SM30 line, and I'd also like to see a 12" length of this in the SM1 and SM30 for really long builds. besembeson
(posted 2015-09-23 07:32:18.0) Response from Bweh at Thorlabs USA: We can provide this to you as a special item if needed. For now, you could use various combinations of the SM30 lens tubes to achieve your desired length or two SM1E60 of the SM1 extension. u.eisenbarth
(posted 2014-02-17 14:55:25.57) Dear Madam / Sir,
We are regularly using the SM tube system and are quite happy with it. However since we also use many custom parts which we want to connect to the SM standard it would be desireable if you would offer a corresponding thread cutter (for both internal and external threads). While our workshop can produce this type of (non-standard) thread on their turning machines it would make life much easier.
Regards,
Udo Eisenbarth cdaly
(posted 2014-02-25 05:52:19.0) Response from Chris at Thorlabs: Thank you for your inquiry. We do have SM05 and SM1 taps to produce internal threads available at the linke below. At the moment, we do not offer these dies as standard items, but we can offer them as customs for the time being. Inquiries for these should be directed to techsupport@thorlabs.com We will contact you directly with this information.
http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=1189 sharrell
(posted 2012-03-30 14:26:00.0) A response from Sean at Thorlabs: Thank you again for your feedback on our lens tube covers. Several of our engineers have had sucess cutting the SC1L24 covers with a band saw or a coping saw. We have added this information to the website as a suggestion to future customers. In addition, one of our engineers tried using a pipe cutter and unfortunately, the tube was crushed. tcohen
(posted 2012-03-29 14:14:00.0) Response from Tim at Thorlabs: One of our target specifications for this product was for it to be easy to cut. We are grateful to hear your feedback on this so we can improve the design. I am talking to our engineers to see if we can offer this with reduced thickness or if we can provide a tool for clean cutting. Thank you for your feedback! user
(posted 2012-03-29 10:58:43.0) The SC1L24 lens tube cover requires a power tool to cut, can you please consider adding a thin tube that could be cut more easily. Alternatively, provide some sort of jig that would allow the tube to be cut, i'm thinking a pipe cutter like gizmo.
Thanks for listening, you guys are great! bdada
(posted 2011-06-24 11:41:00.0) Response from Buki at Thorlabs:
Thank you for your feedback. We have listed more details about our SMx series threads on our website. Please use the link below and click on the "Threading Specs" tab.
http://www.thorlabs.com/NewGroupPage9.cfmObjectGroup_ID=3307&pn=SM1L03#3388
If you have any questions, please contact TechSupport@thorlabs.com jon.hackett
(posted 2011-06-24 10:23:11.0) I see below that you have emailed the details of the SM1 thread form to others, can you please send me the details of this and the SM05, as I am designing parts to mate with them? Thanks. Customer Email: jon.hackett@ametek.co.uk This customer would like to be contacted. jjurado
(posted 2011-06-23 18:10:00.0) Response from Javier at Thorlabs to nkad: Thank you very much for contacting us. We offer a few SM1 couplers which consist of external SM1 threads throughout the entire length of the tube. However, keep in mind that the internal diameter of these couplers is 24.0 mm, as it is not possible to have a tube with both internal and external SM1 threads along the section of the tube. Please take a look at the following link for our SM1 couplers with external threads and our adjustable lens tubes:
SM1 lens tube couplers with external threads:
http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=2704
Adjustable SM1 lens tubes:
http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=4109
I will contact you directly to get a better understanding of your application. nkad
(posted 2011-06-22 21:56:14.0) Do you have an SM1 tube with external threads along the whole length of the tube? This would permit infinite length adjustment for optics fixed at one end, especially when coupled with Lens Tubes Without External Threads. Customer Email: nkad@essex.ac.uk This customer would like to be contacted. Greg
(posted 2011-01-13 08:31:48.0) A response from Greg at Thorlabs to mr.keith: Thank you for contacting us! I have e-mailed you the specifications of our SM1 threading. Thorlabs
(posted 2010-09-02 13:52:28.0) Response from Javier at Thorlabs to driall: I will send you an e-mail with the complete specifications for the SM1 thread shortly. driall
(posted 2010-09-02 11:34:31.0) i have a question on the SM1 threads: 1.035" - 40 does not define thread class, tooth profile. What is the full thread callout? im designing a part to mate with one of these tubes, and id like more info.
Thanks, Dan |
Zoom- Stackable Design Enables Multi-Element Optical Systems
- SM1-Threaded (1.035"-40) Bore Accepts Ø1" (Ø25.4 mm) Optics
- Compatible with Our 30 mm Cage Systems
- 0.30", 0.50", 1.00", and 2.00" Lengths Available in Packs of 5
These stackable Ø1" lens tubes provide a fast and easy means for building compact optical assemblies. Their stackable design and direct interfacing with any SM1-threaded (1.035"-40) components provide flexibility for complex optomechanical assemblies. One SM1RR Retaining Ring is included with each lens tube.
For convenience, four of our most popular SM1 lens tube sizes are also available in packs of 5. Each pack of 5 includes one retaining ring per lens tube for a total of five rings.
| Item # | L | Internal Thread Depth |
|---|---|---|
| SM1L03 | 0.33" (8.4 mm) | 0.30" (7.6 mm) |
| SM1L05 | 0.53" (13.5 mm) | 0.50" (12.7 mm) |
| SM1L10 | 1.03" (26.2 mm) | 1.00" (25.4 mm) |
| SM1L15 | 1.53" (38.9 mm) | 1.50" (38.1 mm) |
| SM1L20 | 2.03" (51.6 mm) | 2.00" (50.8 mm) |
| SM1L25 | 2.53" (64.3 mm) | 2.50" (63.5 mm) |
| SM1L30 | 3.03" (77.0 mm) | 3.00" (76.2 mm) |
| SM1L35 | 3.53" (89.7 mm) | 3.50" (88.9 mm) |
| SM1L40 | 4.03" (102.4 mm) | 4.00" (101.6 mm) |
| Alternatives | Ø1/2", Ø30 mm, Ø1.5", Ø2", and Ø3" Stackable Lens Tubes | ||
|---|---|---|---|
Zoom| Vacuum Specifications | |
|---|---|
| Vacuum Compatibility as Packageda |
>10-6 Torr |
| Materials | 6061-T6 Aluminum |
| Preparation and Packaging |
Chemically Cleaned and Double Vacuum-Bagged |
| Aluminum Outgassing Rate at 20 °C |
7.6 x 10-9 Torr-Liters/s/cm2 |
- Stackable Design Enables Multi-Element Optical Systems
- SM1-Threaded (1.035"-40) Bore Accepts Ø1" (Ø25.4 mm) Optics
- Compatible with SM1-Threaded Vacuum Components
- 0.30", 0.50", and 1.00" Lengths Available
These stackable Ø1" lens tubes provide a fast and easy means for building compact optical assemblies. Their stackable design and direct interfacing with any SM1-threaded (1.035"-40) components provide flexibility for complex optomechanical assemblies. Made from 6061-T6 aluminum, these lens tubes are vacuum compatible down to 10-6 Torr. One SM1RRV Vacuum-Compatible Retaining Ring is included with each lens tube.
These vacuum-compatible lens tubes feature venting channels along the internal threading and at the ends of each tube. These channels allow air trapped between mounted optics an easy means of escape during pumpdown.
Click to Enlarge
Vents along the threading and at the ends of these tubes provide a free path for air to escape when under vacuum.
| Item # | L | Internal Thread Depth |
|---|---|---|
| SM1L03V | 0.33" (8.4 mm) | 0.30" (7.6 mm) |
| SM1L05V | 0.53" (13.5 mm) | 0.50" (12.7 mm) |
| SM1L10V | 1.03" (26.2 mm) | 1.00" (25.4 mm) |
| Alternatives | Ø1/2" Vacuum-Compatible Stackable Lens Tube | ||
|---|---|---|---|
Zoom
- Unlike Stackable Lens Tubes, Optics can be Accessed from Both Ends
- SM1-Threaded (1.035"-40) Bore Accepts Ø1" (Ø25.4 mm) Optics
- Use Lens Tube Couplers to Stack Multiple Lens Tubes
- Allows Coupling of Two Externally SM1-Threaded Components
Unlike our Ø1" stackable lens tubes featured above, these internally threaded lens tubes do not feature a lip at one end nor do they have external SM1 threading. Therefore, optics housed inside can be accessed from both ends. To join these lens tubes end-to-end, use a Lens Tube Coupler. Two SM1RR Retaining Rings are included with each lens tube.
| Alternatives | Ø1/2" and Ø2" Lens Tubes Without External Threads | ||
|---|---|---|---|
Zoom
| Item # | L | Thread Depth |
|---|---|---|
| SM1L05E | 0.54" (13.7 mm) |
0.50" (12.7 mm) |
| SM1L10E | 1.04" (26.4 mm) |
1.00" (25.4 mm) |
- Internal SM1 Threading (1.035"-40) with Optic Retention Lip at One End
- Quickly Add and Remove Optics from Ø1" Lens Tube Assemblies
- 1/2" (12.7 mm) and 1" (25.4 mm) Thread Depths Available
- Ø0.90" (Ø22.9 mm) Clear Aperture
These lens tubes feature internal SM1 threading on one end and a retaining lip for holding optics on the other. They allow optics to be quickly added to any externally SM1-threaded components. The SM1L05E is 1/2" (12.7 mm) long and can hold optics up to 0.3" (8 mm) thick, while the SM1L10E is 1" (25.4 mm) long and can hold optics up to 0.8" (20 mm) thick. Each segment includes an SM1RR retaining ring for securing the optic into place. The retaining ring provides a clear aperture of Ø0.90" (Ø22.9 mm) through the lens tube.
These lens tubes are engraved with their respective part number at the end, as shown in the image to the left. This engraving is hidden when the lens tubes are combined with other SM1-threaded components.
Zoom
- Use as Spacers Between Lens Tubes
- External SM1 Threading (1.035"-40) on Each End
- Ø0.95" (Ø24.0 mm) Clear Aperture
- Lengths Ranging from 1.0" (25.4 mm) to 3.5" (88.9 mm)
These Lens Tube Spacers are designed to connect two components with internal SM1 threads at a fixed distance. They are internally unthreaded and have a clear aperture of Ø0.95" (Ø24.0 mm).
Please note that due to the fixed thread depth of 0.12" (3.0 mm), the orientation of the attached components will be arbitrary. For full control over the component orientation, Thorlabs offers Lens Tube Couplers with adjustable locking rings.
Zoom
Click to Enlarge
The dust cover can be opened or closed by rotating it in either direction.
- Easy Access to Optics
- Rotatable Slip Shield Protects Optics
- Compatible with SM1-Threaded (1.035"-40) Components
- Available in 1", 2", and 3" Thread Depths
These stackable Ø1" lens tubes with side slots provide a fast and easy means for building complex optical assemblies and adjusting the optics without disassembling the setup. Optics can be inserted into the tube and locked into position using the included SM1RR retaining rings. Simply thread the first retaining ring to the desired depth, add the optic, and then use a second retaining ring to secure the optic. Optics can be manually adjusted via the side slots without the use of a spanner wrench. The included rotatable slip shield, with an inner diameter of 1.21" (31.0 mm), fits over the lens tube slots to prevent unwanted light from entering the system and to keep the optical setup free from debris.
| Item # | L1 | L2 | Internal Thread Depth |
|---|---|---|---|
| SM1L10C | 1.03" (26.2 mm) | 0.80" (20.3 mm) | 1.00" (25.4 mm) |
| SM1L20C | 2.03" (51.6 mm) | 1.30" (33.0 mm) | 2.00" (50.8 mm) |
| SM1L30C | 3.03" (77.0 mm) | 2.30" (58.4 mm) | 3.00" (76.2 mm) |
Zoom
- Extra-Long 6" (152.4 mm) Tube for Optics with Large Focal Lengths
- 1.00" (25.4 mm) Long, SM1-Threaded (1.035"-40) Bore Accepts Ø1" (Ø25.4 mm) Optics
- Compatible with 30 mm Cage Systems
The SM1E60 6" Long Extension Tube is designed to enable longer distances between optical components in lens tube systems that utilize lenses with large focal lengths. This tube features thicker walls than our standard lens tubes while maintaining the same outer diameter, which leads to greater rigidity.
| Alternatives | Ø2" Extension Tubes | ||
|---|---|---|---|
Zoom| Retaining Ring Specs | ||||
|---|---|---|---|---|
| Item # | Material | Feature | Thickness | Inner Diameter |
| SM1RR | Black Anodized Aluminum | Standard | 0.08" (2.0 mm) |
0.90" (22.9 mm) |
| SM1RRV | Unanodized Aluminum | Vacuum Compatiblea | 0.08" (2.0 mm) |
0.90" (22.9 mm) |
| SM1LTRR | Black Anodized Aluminum | Rubber O-Ring for Stress-Free Mounting |
0.16" (3.9 mm) |
0.82" (20.7 mm) |
| SM1RRC | Black Anodized Aluminum | 5 mm Thick for High-Curvature Lenses |
0.20" (5.0 mm) |
0.90" (22.9 mm) |
| SM1PRR | Plastic | Non-Marring | 0.11" (2.8 mm) |
0.80" (20.3 mm) |
| POLARIS-SM1RR | Stainless Steel | Vacuum Compatibleb | 0.08" (2.0 mm) |
0.90" (22.9 mm) |
- Six Types of Retaining Rings for Securing Ø1" Optics
- Multiple Hollow Spanner Wrenches Providing Unobstructed Beam Path During Adjustment
- SPW801 Adjustable Spanner Wrench Accommodates Diameters from 0.12" (3.0 mm) to 2.89" (73.4 mm)
The SM1RR is our standard anodized aluminum retaining ring that ships with our Ø1" lens tubes as well as many other Thorlabs components and is available individually and in packs of 10. We offer six different SM1-threaded (1.035"-40) retaining rings, shown in the table to the right, which have unique features and can replace an SM1RR retaining ring. Please keep in mind that due to the increased thickness of some retaining rings, the maximum optic thickness that can be housed inside our standard SM1-compatible mounts will be diminished in some cases.
Click to Assemble
Spanner Wrench Usage
Spanner Wrenches
The 1" long SPW606 and the 3.87" long SPW602 have a hollow design that enables retaining rings with inner diameters of 0.90" to be adjusted and installed in our SM01 series of lens tubes without obscuring the beam path, as shown to the right. Their handles are knurled for improved grip. In addition, the SPW602 wrench has graduations along its side to judge lens depth within a lens tube.
Alternatively, the SPW801 Adjustable Spanner Wrench can be used to position any SM1-threaded retaining ring. Please note that the SPW801 wrench can withstand a maximum torque of 80 inch-pounds. We also offer the SPB1 Spanner Bit, which can be used with a standard 1/4" hex driver (sold separately). The SPB1 is included as part of the SPB600 Spanner Wrench Bit Kit.
| Alternatives | Ø1/2", Ø2", and Ø3" Fixed Diameter Spanner Wrenches | Ø1/2", Ø1.5", Ø2", and Ø3" Retaining Rings | |
|---|---|---|---|
Ø1" Lens Tubes