Laser Diode Tools and Accessories

• Sockets Compatible with Ø3.8 mm, Ø5.6 mm, Ø9 mm, or TO-5 Can Laser Diodes
• Models Available with 3 or 4 Gold-Plated Beryllium Copper (BeCu) Contacts
• Also Available in Packs of 5
• Select Models Offered in 25 and 100 Packs

Thorlabs offers a range of laser diode sockets that provide compatibility with our wide selection of Ø3.8 mm, Ø5.6 mm, Ø9 mm, and TO-5 Can laser diode packages. These sockets have gold-plated BeCu contacts and meet RoHS compliance. The S8060 and S8060-4 sockets have a polarization dot on the top of the package (see drawings below for more information). Colors vary by lot and may be white, off white, black, or tan.

Item #		S038S	S7060R	STO5S	S8060	S8060-4
Photo (Click to Enlarge)
Material		Beryllium Copper (BeCu)
Insulator		FR-4			PTFE
Compatible Lead Diameters		0.008" - 0.014" (0.20 mm - 0.36 mm)	0.016" - 0.020" (0.41 - 0.51 mm)	Ø0.015" - Ø0.020" (0.38 mm - 0.51 mm)	0.016" - 0.020" (0.41 - 0.51 mm)
Compatible Lead Lengths		≤0.09" (2.27 mm)	≤0.15" (3.8 mm)
Outer Diameter		0.153" (3.9 mm)	0.200" (5.08 mm)	9.1 mm (0.36")	0.25" (6.4 mm)	0.25" (6.4 mm)
Substrate Thickness		0.093" (2.4 mm)	0.062" (1.57 mm)	3.18 mm (0.125")	0.19" (4.8 mm)	0.19" (4.8 mm)
Drawing (Click for Details)
Compatibility
Laser Diodes	Ø3.8 mm		x	x	x	x
	Ø5.6 mm	x		x	o	o
	Ø9.0 mm	x	x	x
TO Can Packages	TO-5	x	x		x	x
	TO-18	x	x	x	o	o
	TO-46	x	x	x	o	o

Fully Compatible
o Not a Perfect Fit, but Functional
x Not Compatible

Item # Prefixa	Supported Pin Style	Component Socket	Max LD Forward Voltage
SR9A	A and E	S8060	3.3 V
SR9B	B and H	S8060
SR9C	C and H	S8060
SR9D	D	S8060-4
SR9F	F and G	S8060-4
SR9HA	A and E	S8060	7.5 V
SR9HB	B and H	S8060
SR9HF	F and G	S8060-4

• Standard cables are terminated with bare wires. Cables with a -DB9 suffix in the item # are DB9 terminated.

Diode Compatibility with Strain Relief Cables
Laser Diodes	Ø3.8 mm	x
	Ø5.6 mm	o
	Ø9.0 mm
TO Can Packages	TO-5	x
	TO-18	o
	TO-46	o

Fully Compatible
o   Not a Perfect Fit, but Functional
x   Not Compatible

• Designed for Use with Either Ø5.6 mm or Ø9 mm Laser Diodes
• Includes Laser Socket and 3 Feet (0.91 m) of Shielded Cable
• External 13/32"-40 Threads for Compatibility with Select Laser Diode Accessories:
  • Collimation and Focusing Tubes
  • Ø1/2" Post Mounts
  • Cage Plate Mounts
• Includes Clamping and Reverse Protection Diodes to Suppress ESD
• Available with DB9 Connector for Mating Directly with LDC200C Series Laser Controllers

These strain relief and ESD protection products offer a convenient means of connecting a Ø5.6 mm or Ø9 mm laser diode to many of Thorlabs' laser diode controllers. Each model comes with a laser socket mounted to a small-printed circuit board (PCB). The PCB contains a Schottky diode to clamp any reverse voltages that might appear across the laser diode, as well as a Zener diode to shunt any excessive voltages or ESD away from the diode.

Each model corresponds to one or more of the standard Pin Styles for laser diodes (see the diagram below) and is compatible with our Laser Diode Collimation and Focusing Tubes, Ø1/2" Post Mounts, and Cage Plate Mounts. SR9 models are designed for laser diodes with forward voltages up to 3.3 V, while SR9H models are designed for laser diodes with forward voltages up to 7.5 V. Each strain relief is available with or without a DB9 connector. Models with item #'s that end in -DB9 are pin compatible with many of our Laser Diode Controllers (see the strain relief cable and controller pin diagrams to determine compatibility).

Note: These cables are not designed to provide any temperature regulation. More information on temperature regulating a laser diode is provided in the Laser Diode Tutorial.

Supported Pin Codes

Click to Enlarge
The WR1 Can Opener Cutting Open a TO Can

• Ideal for: Ø2 mm through Ø24 mm Laser Diode Packages
• Compatible with TO-3, TO-5, TO-8, TO-18, TO-39, and TO-46 Packages

The WR1 Can Opener is a hand-held device designed to remove the cans from standard laser packages. Many applications, such as fiber pigtailing, can be optimized by having closer access to the laser chip.

Operation is as simple as placing a diode onto the two rollers at the front of the device, lightly applying pressure with the rubber covered grips, and turning the blade actuator (as shown in the image to the right). The precision ground, hardened steel blade will easily cut through the wall of the diode can, safely removing it. For packages greater than 20 mm (0.8") in diameter, the rollers must be removed and reinstalled in their outer mounting positions using a 5/64" (2 mm) hex key.

The WR1 can opener is also compatible with any photodiodes and LEDs packaged in one of the TO can sizes listed above.